Honeywell He420a1009 Steam Humidifier
Still running great. I noticed that the dial Humidistat wasn't calibrated very well - I had to set the dial to 50-60% in order to get it to turn on when the humidity in the house was 30%.
Honeywell He420a1009 Steam Humidifier
After a little research, I discovered that these things are controlled by a long nylon strip inside the unit that changes length based on the humidity.
Honeywell He420a1009 Steam Humidifier
By changing the slack in that strip, you can calibrate the dial. If you look at the back/side of the humidistat, you will notice that there is a little, red, hex screw knob thing. By twisting that slightly either way, you can change the amount of tension on the nylon strip and calibrate the unit.
Honeywell He420a1009 Steam Humidifier
The easiest way to do the calibration is to use a hygrometer (just a thing that tells you the relative humidity). Let both sit in the same room next to each other for a few minutes, then turn the humidistat knob until you hear it click to turn on (it will click even if it's not hooked up).
Honeywell He420a1009 Steam Humidifier
Based on where that on/off threshold is, adjust the red hex screw (little at a time) until that on/off point is the same as what the hygrometer says the humidity level is (eg. my hygrometer was saying it was 43% RH, so I adjusted it till the click was slightly higher than the 40.
Honeywell He420a1009 Steam Humidifier
Still running great. I noticed that the dial Humidistat wasn't calibrated very well - I had to set the dial to 50-60% in order to get it to turn on when the humidity in the house was 30%.
Honeywell He420a1009 Steam Humidifier
After a little research, I discovered that these things are controlled by a long nylon strip inside the unit that changes length based on the humidity.
Honeywell He420a1009 Steam Humidifier
By changing the slack in that strip, you can calibrate the dial. If you look at the back/side of the humidistat, you will notice that there is a little, red, hex screw knob thing. By twisting that slightly either way, you can change the amount of tension on the nylon strip and calibrate the unit.
Honeywell He420a1009 Steam Humidifier
The easiest way to do the calibration is to use a hygrometer (just a thing that tells you the relative humidity). Let both sit in the same room next to each other for a few minutes, then turn the humidistat knob until you hear it click to turn on (it will click even if it's not hooked up).
Honeywell He420a1009 Steam Humidifier
Based on where that on/off threshold is, adjust the red hex screw (little at a time) until that on/off point is the same as what the hygrometer says the humidity level is (eg. my hygrometer was saying it was 43% RH, so I adjusted it till the click was slightly higher than the 40.
Honeywell He420a1009 Steam Humidifier
Yes, the air quality surely affects your health system. This article describe the causes of getting many diseases just because of bad outdoor air quality and indoor air quality also. Heating and Cooling Milton
ReplyDeletePretty good post. I just stumbled upon your blog and wanted to say that I have really enjoyed reading your blog posts. Any way I'll be subscribing to your feed and I hope you post again soon. Big thanks for the useful info. Best air purifier under 25K in India
ReplyDeleteTook me time to read all the comments, but I really enjoyed the article. It proved to be Very helpful to me and I am sure to all the commenters here! It’s always nice when you can not only be informed, but also entertained! air purification system
ReplyDelete